Genesi HTE

The most popular system on the market for years, the Genesi HTE combines the atomization force typical of now obsolete conventional spray guns with the high transfer efficiency of an HVLP spray gun. Ideal spray gun for HS and VHS transparent, it is also recommended for bases. In fact, its balance in terms of flows and air distribution make it a versatile spray gun suited for all types of bodywork paints. The new Top Line version, with high atomization cap and new 12-hole nozzle distributor, have improved performance and efficiency, positioning it at the top of world performance.

Genesi HVLP

HTE nozzle

High performance nozzle with 12 distribution holes.

Fan adjustment

Completely open for ideal paint atomization.

Product regulation

From 3 to 3,5 turns. Subjective value and therefore modifi able according to the user’s habits.

Pressure regulation

2 bar for opaque base (H2Oand solvent); 2,3 bar for transparent and pastel MS-HS-VHS.

Air adjustment

Completely open for total air flow.

The main features that distinguish Genesi HTE Top Line are:

  • new high pulverising “TOP” air cap;
  • new 12-hole nozzle air diffusor;
  • reduced air consumption (300 - 340 l/min);
  • cap pressure 1,2 bar;
  • transfer effi ciency over 70% tested by the most qualifi ed Italian and European boards;
  • maintenance ease;
  • resistant to aggressive solvents and strippers.

 

packaging

Packaging

All spray guns of the Walcom® range are supplied in easy to use rigid plastic cases containing all the accessories for a proper cleaning and maintenance of the product.

Painting distance

Between 15 and 20 cm, guarantees improved product layout on painted parts.

  • Tank: aluminium 750 cc
    Body: forged and chrome-plated aluminium
    TOP cap: chemical nickel-plated brass
    Nozzle: AISI 303 stainless steel
    Needle-spring: stainless steel
    Seal gaskets: self-lubricating and adjustable PTFE (Teflon)
    Weight: 725 g
    Working pressure: 2,0 - 2,5 bar
    Air consumption: 300 - 340 l/min
    Nozzle Ø: 0,8 - 1,0 - 1,2 - 1,3 - 1,4 - 1,7 - 1,9 - 2,5

    TOP air inlet pressure regulator with pressure gauge

    Ref. 9535

    Genesi S HTE

    Recommended use:

    Body shop
  • Tank: POM C 680 cc
    Body: forged and chrome-plated aluminium
    TOP cap: chemical nickel-plated brass
    Nozzle: AISI 303 stainless steel
    Needle-spring: stainless steel
    Seal gaskets: self-lubricating and adjustable PTFE (Teflon)
    Weight: 810 g
    Working pressure: 2,0 - 2,5 bar
    Air consumption: 300 - 340 l/min
    Nozzle Ø: 0,8 - 1,0 - 1,2 - 1,3 - 1,4 - 1,7 - 1,9 - 2,5

    TOP air inlet pressure regulator with pressure gauge

    Ref. 9530

    Genesi S HTE

    Recommended use:

    Body shop
  • Camlock suction cup aluminium 1000 cc
    Body: forged and chrome-plated aluminium
    TOP Cap: chemical nickel-plated brass
    Nozzle: AISI 303 stainless steel
    Needle-spring: stainless steel
    Seal gaskets: self-lubricating and adjustable PTFE (Teflon)
    Weight: 1,045 Kg
    Working pressure 2,0 - 2,5 bar
    Air consumption 300 - 340 l/min
    Nozzle Ø: 0,8 - 1,0 - 1,2 - 1,3 - 1,4 - 1,7 - 1,9 - 2,5

    TOP air inlet pressure regulator with pressure gauge

    Ref. 9540

    Genesi I HTE

    Recommended use:

    Body shop
  • To be used through pressurized containers, low pressure pumps - Product inlet M1/4”

    Body: forged and chrome-plated aluminium
    TOP cap: chemical nickel-plated brass
    GEO nozzle: AISI 303 stainless steel
    Needle-spring: stainless steel
    Seal gaskets: self-lubricating and adjustable PTFE (Teflon)
    Weight: 610 g
    Working pressure: 2,0 - 2,5 bar
    Air consumption: 300 - 340 l/min
    Nozzle Ø: 0,7 - 1,0 - 1,3 - 1,5 - 1,7 - 1,9

    TOP air inlet pressure regulator with pressure gauge

    Ref. 9550

    Genesi SP HTE

    Recommended use:

    Body shop